AIPTEK PocketCinema N100 - Manual (Page 13)

User’s Manual
Page 13
EN
Troubleshooting
If your projector does not seem to be functioning properly, check the items below before
you contact an authorized service center.
Symptom Check Point
The projector does not
work when connecting
to a notebook or PC
with cable. 1. Check if the HDMI cable is plugged correctly.
2. Make sure the PC has been switched to
projectordisplay.
The projected image is
too dark. 1. Use the projector in a darker environment.
2. Increase the brightness by using the AC power adapter.
3. Scale down the projectional image size.
The projected image is
blurred. 1. Adjust the focus. Please refer to “Adjusting the Focus”.
2. Check if the lens is dirty.
The surface
temperature of projector
is high. Because of the high-luminance LED, it is normal that this
projector generates heat in long-time use. It will not affect
the performance of the projector. Always keep the
ventilation slots free of dirt or obstructions and operate the
projector in a properly ventilated environment.
Recovering from
abnormality This can be useful when the projector is freezing,
crashing or locking up during the operation. Press the
Power button for 8 seconds to reboot your projector.