Asus XG-DLS - Manual (Page 36)

ASUS XG-DLS User’s Manual 54
IV. BIOS SOFTWARE
Load Defaults
IV
. BIOS
Load BIOS Defaults
The “Load BIOS Defaults” option allows you to load the troubleshooting default
values permanently stored in the BIOS ROM. These default settings are non-opti-
mal and disable all high performance features. To load these default settings, high-
light “Load BIOS Defaults” on the main screen and then press . The system
displays a confirmation message on the screen. Press and then to
confirm. Press and then to abort. This feature does not affect the
fields on the Standard CMOS Setup screen.
Load Setup Defaults
The “Load Setup Defaults” option allows you to load the default values to the sys-
tem configuration fields. These default values are the optimized configuration set-
tings for the system. To load these default values, highlight “Load Setup Defaults”
on the main screen and then press . The system displays a confirmation
message on the screen. Press and then to confirm. Press and
then to abort. This feature does not affect the fields on the Standard CMOS
Setup screen.
Supervisor Password and User Password
These two options set the system passwords. “Supervisor Password” sets a pass-
word that will be used to protect the system and the Setup utility; “User Password”
sets a password that will be used exclusively on the system. By default, the system
comes without any passwords. To specify a password, highlight the type you want
and then press . A password prompt appears on the screen. Taking note that
the password is case sensitive, and can be up to 8 alphanumeric characters long, type
in your password and then press . The system confirms your password by
asking you to type it again. After setting a password, the screen automatically re-
verts to the main screen.