Hardware setup, 18 asus cuv4x user’s manual – Asus E500-PV User Manual
Page 18

18
ASUS CUV4X User’s Manual
3. HARDWARE SETUP
3. H/W SETUP
Motherboard Settings
1) JumperFree™ Mode (JEN)
This jumper allows you to enable or disable the JumperFree™ mode. The
JumperFree™ mode allows processor settings to be made through the BIOS
setup (see 4.4 Advanced Menu).
Setting
JEN
Enable (JumperFree)
[2-3] (default)
Disable (Jumper)
[1-2]
CUV4X
CUV4X JumperFree™ Mode Setting
Jumper
Mode
JumperFree
Mode
(Default)
JEN
2 3
JEN
1 2
ON
1 2 3 4 5 6 7 8
OFF
DIP_SW
NOTE: In JumperFree™ mode, all dip switches (DIP_SW) must be set to OFF.
Motherboard Features Settings (DIP Switches - DIP_SW)
The motherboard’s onboard functions are adjusted through the DIP switches. The
white block represents the switch’s position. The example below shows all the
switches in the OFF position.
CUV4X
CUV4X DIP Switches
ON
1 2 3 4 5 6 7 8
OFF
ON
< F
requency Multiple
< Frequency Multiple
< Frequency Multiple
< Frequency Multiple
< Frequency Selection
< Frequency Selection
< Frequency Selection
< Frequency Selection