Asus SD222-YA - Manual (Page 14)

3-1 ASUS LCD Monitor SD222 Series
3.1 OSD (On-Screen Display) menu
3.1.1 How to reconfigure
SD222
Color
Picture
Input Select
Move OK Exit
Menu
Brightness
Contrast
ASCR
Color Temp.
100
80
ON
User Mode
2.2 Gamma
Mode Dynamic
Saturation 50
1. Press the MENU button to activate the OSD menu. You may also use
the remote controller to activate the OSD by pressing the “guide” key.
2. Press  and ► button to navigate through the functions. Press
the OK button to highlight and activate the desired function. If the
selected function has a sub-menu, press and ► button again to
navigate through the sub-menu. Press the OK button to highlight and
activate the desired sub-menu function.
3. Press  and ► button to change the settings of the selected function.
4. To exit from the OSD menu, press the MENU button. Repeat step 2
and step 3 to adjust any other function.
3.1.2 OSD Function Introduction
1. Color
Select the image color you like from this function.
SD222
Color
Picture
Input Select
Move OK Exit
Menu
Brightness
Contrast
ASCR
Color Temp.
100
80
ON
User Mode
2.2 Gamma
Mode Dynamic
Saturation 50
• Mode: There are standard, dynamic, soft, and monochrome preset
modes.
• Brightness: To adjust the luminance ranging from 0 to 100.
The button is a hotkey to activate this function.
• Contrast: To adjust the contrast ranging from 0 to 100.