Asus RS300-E7/RS4 - Manual (Page 95)

ASUS RS300-E7/RS4 6-3
6.1.3 RAID controller selection
You can choose either the LSI Software RAID Configuration Utility or the Intel
Rapid Storage Technology as the default utility to create RAID set(s). See 5. RAID
configuration utility selection on page 4-6 for details.
6.1.4 Setting the RAID item in BIOS
You must enable the RAID function in the BIOS Setup before creating RAID set(s)
using SATA HDDs. To do this:
1. Enter the BIOS Setup during POST.
2. Go to the Advanced Menu > SATA Configuration, then press .
3. Set SATA Mode to [RAID Mode]
4. Press to save your changes and exit the BIOS Setup.
Refer to Chapter 5 for details on entering and navigating through the BIOS
Setup.