Asus RS300-E7/RS4 - Manual (Page 84)

5-20 Chapter 5: BIOS setup
USB transfer time-out [20 sec]
Allows you to select the USB transfer time-out value.
Configuration options: [1 sec] [5 sec] [10 sec] [20 sec]
Device reset time-out [20 sec]
Allows you to select the USB device reset time-out value.
Configuration options: [10 sec] [20 sec] [30 sec] [40 sec]
Device power-up delay [Auto]
Configuration options: [Auto] [Manual]
Device power-up delay in seconds [XX]
This item appears only when you set the Device power-up delay item to [manual].
Use the <+> and <-> keys to adjust the value. The values range from 1 to 40 with a
one-second interval.
5.5.10 ME Subsystem
Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc.
Advanced
ME Subsystem Help Intel ME Subsystem Configuration
ME Subsystem [Disabled]
ME Subsystem [Disabled]
Allows you to enable or disable the Intel Management Engine (Intel ME) Subsystem
that performs various tasks while the system is in sleep, during the boot process
and when the system is running. Configuration options: [Enabled] [Disabled]
5.5.11 Onboard Devices Configuration
The Onboard Devices Configuration menu items allow you to change the advanced
settings for onboard devices.
Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc.
Advanced
Launch Intel PXE OpROM INTEL W82574L OpROM1 [PXE]
INTEL W82574L OpROM2 [PXE]
INTEL W82574L OpROM3 [Disabled]
INTEL W82574L OpROM4 [Disabled]
Serial Port 1 Configuration
Serial Port 2 Configuration
Parallel Port Configuration