Asus WL-100W - Manual (Page 18)

ASUS WLAN Card 1
Quick Start Guide
English
Survey - Site Survey
Use the Site Survey tab to view statistics
on the wireless networks available to the
WLAN Card and their parameters.
•
SSID: The SSID of the available
networks.
• Channel: The channel used by each
network.
Config - Authentication
This tab allows you to set the security settings to match those of your AP. It is
configurable only if you have set Network Authentication to WPA or WPA2 in
Config-Encryption tab.
Authentication Type
The authentication type methods include:
PEAP: PEAP (Protected Extensible
Authentication Protocol) authentication
is a version of Extensible Authentication
Protocol (EAP). EAP ensures mutual
authentication between a wireless client
and a server that resides at the network
operations center.
TLS/Smart Card: TLS (Transport Layer
Security) authentication is used to create an encrypted tunnel and achieve
server-side authentication in a manner similar to Web server authentication
using Secure Sockets Layer (SSL) protocol. This method uses digital
certificates to verify the identity of a client and server.
TTLS: TTLS authentication uses certificates to authenticate the server, while
maintaining similar security properties to TLS such as mutual authentication
and a shared confidentiality for session WEP key.
LEAP: LEAP (Light Extensible Authentication Protocol) authentication is a
version of Extensible Authentication Protocol (EAP). EAP ensures mutual
authentication between a wireless client and a server that resides at the
network operations center.
Md5-challenge: Md5-challenge is a one-way encrypting algorithm that uses
usernames and passwords. This method does not support key management,
but require a preset key.