Asus WL-330g - Manual (Page 42)

3-18 Chapter 3: Configuration
Access Control page
The MAC Access Control page allows you to control the wireless network
traffic by specifying the MAC addresses of wireless clients allowed to
establish connection to the WL-330g.
To specify the wireless clients allowed to establish connection to the WL-330g:
1. Click , then select the Only allow Stations with MAC listed below to
access this device option. The MAC address fields are activated
Selecting the Accept association requests from any station option
allows all wireless clients operating within the WL-330g range to
establish connection.
2. Type the MAC address(es) of the wireless clients allowed to establish
connection to the WL-330g, then click Apply.