Zanussi ZHC9244X User Manual
Page 66
66
• Fix the flues support bracket to the wall with 2
screws.
• Hang the hood to the 2 upper screws.
• Introduce and screw the screws (and
washers) up into the holes for the definitive
fixing (COMPULSORY!!). Then, having
checked the setting of the hood, TIGHTEN
ALL THE upper and lower SCREWS.
• Connect a tube (tube and bands for fixing not
supplied, to be purchased) for discharging the
fumes to the connection ring placed over the
aspiration motor unit.
The other end of the tube should be
connected to a device for expelling fumes on
the outside of the hood in the aspiration
version.
G
Ш 8
Ш 5x45
Note: the lower fixing points are visible
removing the grease filters and they are at
the sides of the hood
If you want to use
the filtering version,
fix deflector to flues
support bracket and
connect the other
end of the tube to
the connection ring
placed on deflector.