Asus Reader Pro - Manual (Page 9)

ASUS Reader Pro 9
Using Reader Pro
After installing the drivers, you may start using Reader Pro.
1. Flip down the rear compartment cover and pull out the USB
plug and cable.
Using Reader Pro
The Removable Disk icons will not be displayed correctly
if the device drivers are not installed.
2. Insert the USB cable on the notch of
the compartment cover. Close the
cover.
3. Insert the USB plug into any available USB port (USB 2.0
port recommended). Use the USB extension cable if the
Reader Pro USB cable is not enough.
4. The system automatically detects the Reader Pro. Click My
Computer to view the Removable Disk icons.