Asus BP5220 - Manual (Page 39)

ASUS BP5220/AS-D592 3-3
3.1.2 ASUS EZ Flash 2 utility
ASUS EZ Flash 2 allows you to update the BIOS without having to go through the
long process of booting from a floppy disk and using a DOS-based utility. The
EZ Flash 2 utility is built in the BIOS chip so it is accessible by pressing +
during the Power-On Self-Test (POST).
To update the BIOS using EZ Flash 2:
1. Download the latest BIOS file for this motherboard from the ASUS website at
www.asus.com.
2. Save the BIOS file to a floppy disk or a USB flash disk, then restart the
system.
3. Launch EZ Flash 2 using either of the following methods.
(1) Press + during POST to display the following.
(2) Enter the BIOS setup program. Go to Tools > EZ Flash 2 then press
.
4. Press to locate the correct file. Press .
When the correct BIOS file is found, EZ Flash 2 performs the BIOS updating
process and automatically reboots the system when done.
Note
ASUSTek EZ Flash 2 BIOS ROM Utility V3.25
Current ROM Update ROM
A:
FLASH TYPE: MXIC 25L8005
PATH: A:\
BOARD: P5KPL-AM/PS
VER: 0003
DATE: 07/22/08
BOARD: Unknown
VER: Unknown
DATE: Unknown
[Enter] Select or Load [B] Backup [ESC] Exit
[Tab] Switch [Up/Down/Home/End] Move
Note
• This function supports devices such as USB flash disks and floppy disks
with FAT 32/16 format and single partition only.
• DO NOT shut down or reset the system while updating the BIOS to prevent
system boot failure!
2. Copy the original or the latest motherboard BIOS file to the bootable floppy
disk.