Asus TX300CA - Manual (Page 83)

ASUS Transformer Book E-Manual 8
BIOS Settings
NOTE: The BIOS screens in this section are for reference only. The
actual screens may differ by model and territory.
Boot
This menu allows you to set your boot option priorities. You may
refer to the following procedures when setting your boot priority.
1. On the Boot screen, select Boot Option #1.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Set Administrator
Password. The password
length must be in the
following range:
Minimum length 3
Maximum length 20
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Main Advanced Chipset Boot Security Save & Exit
→← : Select Screen
↑↓ : Select Item
Enter: Select
+/— : Change Opt.
F1 : General Help
F9 : Optimized Defaults
F10 : Save & Exit
ESC : Exit
Version 2.15.1226. Copyright (C) 2012 American Megatrends, Inc.
Boot Configuration
Setup Prompt Timeout 2
Bootup NumLock State [Off]
Quiet Boot [Enabled]
UEFI Boot [Enabled]
CSM16 Module Version 07.69
Gate A20 Active [Upon Request]
Option ROM Messages [Force BIOS]
INT19 Trap Response [Immediate]
Driver Option Priorities
Boot Option Priorities
Boot Option #1 [Windows Boot...]
Boot Option #2 [Hitachi HTS...]
Boot Option #3 [ASIX...]
BEV Device BBS Priorities
Hard Drive BBS Priorities
Add New Boot Option
Delete Boot Option
CSM parameters