Asus VS229HA - Manual (Page 20)

3-2 Chapter 3: General Instructions
2.. Color.
You can adjust Brightness, Contrast,
Saturation, Color Temp., and Skin
Tone from this menu.
•. Brightness: the adjusting
range is from 0 to 100.
is a hotkey to activate this
function.
•. Contrast: the adjusting range is from 0 to 100.
•. Saturation: the adjusting range is from 0 to 100.
•. Color.Temp.: contains four modes including Cool, Normal, Warm, and
User Mode.
•. Skin.Tone: contains three color modes including Reddish, Natural, and
Yellowish.
•. Smart.View: provides better display quality under big viewing angle.
In the User mode, colors of R (Red), G (Green), and B (Blue) are user-
configurable; the adjusting range is from 0-100.
3.. Image
You can adjust Sharpness, Trace
Free, Aspect Control, ASCR,
Position (VGA only), and Focus
(VGA only) from this menu.
•. Sharpness: the adjusting
range is from 0 to 100.
•. Trace.Free: adjusts the
response time of the monitor.
•. Aspect.Control: adjusts the aspect ratio to “Full”, “4:3”, or “OverScan”
(only available for the HDMI input).
•. ASCR: turns on/off the ASCR (ASUS Smart Contrast Ratio) function.
•. Position: adjusts the horizontal position (H-Position) and the vertical
position (V-Position) of the image. The adjusting range is from 0 to 100.
•. Focus: reduces Horizonal-line noise and Vertical-line noise of the image
by adjusting (Phase) and (Clock) separately. The adjusting range is from
0 to 100.
• Phase adjusts the phase of the pixel clock signal. With a wrong phase
adjustment, the screen shows horizontal disturbances.
• Clock (pixel frequency) controls the number of pixels scanned by one
horizontal sweep. If the frequency is not correct, the screen shows vertical
stripes and the image is not proportional.