Asus AP130-D5 User Manual

Page 64

Text mode
Original mode

4-6

Chapter 4: BIOS Setup

7. The utility starts to program the new BIOS information into the Flash

ROM. When the programming is done, the message

“Flashed

Successfully” appears.

8. Follow the onscreen instructions to continue.

If you encounter problems while updating the new BIOS, DO NOT turn
off the system because this may cause boot problems. Just repeat the
process, and if the problem persists, load the original BIOS file you
saved to the boot disk. If the Flash Memory Writer utility is not able to
successfully update a complete BIOS file, the system may not boot. If
this happens, call the ASUS service center for support.

This manual is related to the following products:

P4B533-M