Asus RS704D-E6/PS8 - Manual (Page 42)

Chapter 3: Installation options 3-2
3.1 Rackmount rail kit items (optional)
Your rackmount rail kit package contains:
•
two pair of server rails (for the server)
• two pairs of rack rails (for the rack)
• Nut-and-bolt type screws
Nuts and screws Rack rails Rear end Front end
3.2 Attaching the rails to the server
To attach the server rails
1. Attach the front end of the server rail
to the side of the chassis, matching
each of the three hooks to the holes
on the rail. Then slide the rail toward
the front panel until it locks in place.
2. Attach the rear end of the server rail
to the side of the chassis with one
screw.