Asus ASMB4-iKVM - Manual (Page 24)

2-8 Chapter 2: Installation
2.4 BIOS configuration
You need to adjust the settings in the BIOS setup of the remote server for correct
configuration and connection to the central server.
• Update the remote server BIOS file following the instructions in the
motherboard/system user guide. Visit the ASUS website (www.asus.com)
to download the latest BIOS file for the motherboard.
• The BIOS setup screens shown in this section are for reference purposes
only, and may not exactly match what you see on your screen.
Running the BIOS IPMI configuration
To configure the IPMI in the BIOS:
1. Restart the remote server, then press during POST to enter the BIOS
setup.
2. Go to the Server menu, then select the IPMI Configuration sub-menu. Use
this sub-menu to configure the IPMI settings.
3. When finished, press to save your changes and exit the BIOS setup.
IPMI Configuration
Select Screen
Select Item
Enter Go to Sub Screen
F1 General Help
F10 Save and Exit
ESC Exit
v02.61 (C)Copyright 1985-2008, American Megatrends, Inc.
BIOS SETUP UTILITY
Server
IPMI Configuration
BMC Firmware version : 1.03
Set LAN1 Configuration
Set LAN3 Configuration
View BMC System Event Log
Clear BMC System Event Log
BMC Watch Dog Timer Action [Disabled]
InPut for Set LAN
Configuration command.
See IPMI 1.5 Spec,
table 19.1
NOTE:-
Each question in
this group may take
considerable amount of
time.
Select Set LAN1 Configuration for shared LAN; select Set LAN3
Configuration for dedicated LAN.