Asus ASMB4-iKVM - Manual (Page 20)

2-4 Chapter 2: Installation
2.3 Firmware update and IP configuration
You need to update the ASMB4-iKVM/ASMB4-SOL PLUS firmware and configure
IP source before you start using the ASMB4-iKVM/ASMB4-SOL PLUS board.
2.3.1 Firmware update
To update the firmware:
1. Insert the support CD into the optical drive.
2. Restart the remote server, then press during POST to enter the BIOS
setup.
3. Go to Boot menu and set the Boot Device Priority item to [CD-ROM].
4. When finished, press to save your changes and exit the BIOS setup.
5. On reboot, the main menu appears. Select ASMB4-iKVM (or ASMB4-SOL
PLUS) Firmware Update for Preserve Configuration, and press to
enter the sub-menu.
6. A confirmation message appears, asking whether you want to update the
firmware or not. Select to update.
ASUS Server Z8PE-D12X MB
FreeDOS command prompt
Configure BMC IP Source Static IP for LAN1
Configure BMC IP Source DHCP for LAN1
Configure BMC IP Source Static IP for LAN3
Configure BMC IP Source DHCP for LAN3
ASMB4-iKVM Firmware Update for Preserve Configuration
ASMB4-iKVM Firmware Update for Clear Configuration
The firmware updating process starts.
WARNING !!!
UPDATE ASMB4-iKVM FIRMWARE NOW !
DO YOU WANT TO CONTINUE ?
No Yes