Asus USB-N10 NANO - Manual (Page 15)

USB-N10 Nano WLAN Adapter User Manual
12 ASUS Wireless-N Adapter
To disable the access control function, select Disable from the Access Control
Policy screen.
To allow a wireless client to associate
with the WLAN adapter:
1. Select
Enable, then select Access
from the Access/Reject dropdown
list.
2. Key in the MAC address in the lower
left field and click Add MAC.
3. Click OK button to finish.
Note: Only the wireless clients on the Access list are allowed to associate with
the WLAN adapter.
To prevent a wireless client from associating with the WLAN adapter:
1. Select
Enable, then select Reject from the Access/Reject dropdown list.
2. Key in the MAC address in the lower left field and click Add MAC.
3. Click OK button to finish.
Note: The wireless clients on the Reject list are not allowed to associate with
the WLAN adapter.
In the Soft AP mode, you can limit the wireless clients that associate with the WLAN
adapter through the access control function. Click Configuration > Edit Config >
ACL.