Asus USB-N10 NANO - Manual (Page 14)

USB-N10 Nano WLAN Adapter User Manual
11 ASUS Wireless-N Adapter
2. Click General and then click ICS
to enable ICS. The General table
displays the wireless clients that are
currently connecting to the Soft AP.
3. Select a network(station) from the
available networks list, then click
Apply.
To switch to the Soft AP mode:
1. Click
AP to switch to the Soft AP
mode.
3.3 Soft AP mode (Windows ® XP/Vista/7/8)
The ASUS USB-N10 Nano supports the Soft AP mode. In this mode, the WLAN
adapter acts as a virtual AP.
4. Wait for a while until your WLAN
adapter changes to the Soft AP mode
successfully.
IMPORTANT: Before configuring the Soft AP mode, connect your computer to a
wired network to provide network access for your wireless clients.
Note:The ASUS WLAN Adapter Setting icon in the system tray switches
to the ASUS Wireless Access Point icon .