Asus ESC500 G2 - Manual (Page 41)

2-23 ASUS ESC500 G2
2.8 Removing the system fan
You may need to remove previously installed system components when installing
or removing other system components, or when replacing a defective component.
This section tells how to remove the system fan.
To remove the system fan:
1. Disconnect the chassis fan cable from the CHA_FAN1 connector on the
motherboard.
2. Locate and remove four system fan
screws at the rear panel. Keep the
screws for later use.
Hold the system fan with one
hand while removing the system
screws.
3. Remove the system fan, and then
set aside.