Asus TS100-E8-PI4 - Manual (Page 34)

Chapter 2: Hardware setup 2-14
2.6 Hard disk drives (HDD)
The server system supports four (4) Serial ATA hard disk drives with plastic HDD rails.
To install a Serial ATA hard disk drive:
1. Attach the bundled plastic HDD
rails and secure it with four (4)
screws.
2. Carefully insert the HDD with the plastic
HDD rails assembly all the way into the
drive bay.
3. Connect the SATA cable to the HDD
SATA connector.
4. Connect a power plug from the power
supply to the power connector on the
back of the drive.
2
3
4