1 creating a raid set – Asus Z8PH-D12/IFB User Manual
Page 120
5-26
Chapter 5: RAID configuration
5.3.1
Creating a RAID set
To create a RAID set
1.
From the utility main menu, select
1. Create RAID Volume and press
2.
Enter a name for the RAID set and press
3.
When the
RAID Level item is selected, press the up/down arrow key to select
a RAID level to create, and then press
4.
When the
Disks item is selected, press
you want to include in the RAID set. The
SELECT DISKS screen appears.
5.
Use the up/down arrow key to select a drive, and then press
to select. A small triangle marks the selected drive. Press
completing your selection.
Intel(R) Matrix Storage Manager option ROM v8.5.0.1030 ICH10R/DO wRAID5
Copyright(C) 2003-08 Intel Corporation. All Rights Reserved.
[
CREATE VOLUME MENU
]
[
HELP
]
Enter a unique volume name that has no special characters and is
16 characters or less.
[↑↓]Change [TAB]-Next [ESC]-Previous Menu [ENTER]-Select
Name:
Volume0
RAID Level: RAID0(Stripe)
Disks: Select Disks
Strip Size: 128KB
Capacity: 0.0 GB
Sync: N/A
Create Volume
[ SELECT DISKS ]
Port Drive Model Serial # Size Status
0 ST3160812AS 9LS0HJA4 149.0GB Non-RAID Disk
1 ST3160812AS 9LS0F4HL 149.0GB Non-RAID Disk
2 ST3160812AS 3LS0JYL8 149.0GB Non-RAID Disk
3 ST3160812AS 9LS0BJ5H 149.0GB Non-RAID Disk
Select 2 to 6 disks to use in creating the volume.
[↑↓]-Prev/Next [SPACE]-SelectDisk [ENTER]-Done