Asus Z8PH-D12/IFB User Manual

Page 101

ASUS Z8NH-D12 Series

5-7

Select all the drives required for the RAID set, and then press to
configure array setting.

Press to select the configurable array.

The

ARRAY SELECTION MENU displays the available drives connected to

the SATA ports. Use the up/down arrow key to select the drives you want to
include in the RAID set, and then press . When selected, the drive
indicator changes from

READY

ONLIN A[X]-[Y], where X is the array

number, and Y is the drive number.

•

The information of the selected hard disk drive displays at the bottom of the
screen.

•

You need at least two identical hard disk drives when creating a RAID 1 set.

•

You need at least four identical hard disk drives when creating a RAID 10
set.

Management Menu

Configure

Initialize

Objects

Rebuild

Check Consistency

PORT #

DNLIN A00-00

DNLIN A00-01

0
1

Easy Configuration - ARRAY SELECTION MENU

Select Configurable Array(s)

A-0

SPAN-1

LSI Software RAID Configuration Utility Ver A.60 Jul 30, 2008

BIOS Version A.08.09161344R

Cursor Keys, SPACE-(De)Select F2-ChIdInfo F3-SlotInfo F10-Configure Esc-Quit