Asus ASMB5-iKVM - Manual (Page 22)

2-4 Chapter 2: Installation
2.3 Firmware update and IP configuration
You need to update the ASMB5-iKVM firmware and configure IP source before
you start using the ASMB5-iKVM board.
2.3.1 Firmware update
To update the firmware:
1. Insert the support CD into the optical drive.
2. Restart the remote server, then press during POST to enter the BIOS
setup.
3. Go to Boot menu and set the Boot Device Priority item to [CD-ROM].
4. When finished, press to save your changes and exit the BIOS setup.
5. On reboot, the main menu appears. Select ASMB5-iKVM Firmware Update
for Preserve Configuration, and press to enter the sub-menu.
6. A confirmation message appears, asking whether you want to update the
firmware or not. Select to update.
ASUS Server P8B-E/4L MB
FreeDOS command prompt
Configure BMC IP Source Static IP for LAN1
Configure BMC IP Source DHCP for LAN1
Configure BMC IP Source Static IP for DM_LAN1
Configure BMC IP Source DHCP for DM_LAN1
ASMB5 Firmware Update for Preserve Configuration (SDR,LAN,Username)
ASMB5 Firmware Update for Clear Configuration (SDR,LAN,Username)
The firmware updating process starts.
WARNING !!!
UPDATE ASMB5 FIRMWARE NOW !
DO YOU WANT TO CONTINUE ?
No Yes