Asus ASMB5-iKVM User Manual

Page 21

ASUS ASMB5-iKVM

2-3

4. When installed, the board appears

as shown.

5. Reinstall the remote server system cover, then connect the power plug to a

grounded wall socket.

Everytime after the AC power is re-plugged, you have to wait for about 30

seconds for the system power up.

6. Insert the LAN cable plug to the LAN port for server management.

Refer to the Appendix for the location of the LAN port for server management.

7. For direct LAN configuration, connect the other end of the LAN cable to the

local/central server LAN port.

For connection to a network hub or router, connect the other end of the LAN

cable to the network hub or router.

3. Press the board firmly until it is

completely seated in place.