Asus TS300-E7/PS4 User Manual

Page 58

Chapter 4: Motherboard information

4-6

4. LAN controller setting (3-pin LAN_SW1, LAN_SW2, LAN_SW3,

LAN_SW4)
These jumpers allow you to enable or disable the onboard Intel

82574L

Gigabit LAN controllers. Set to pins 1-2 to activate the Gigabit LAN feature.

5. RAID configuration utility selection (3-pin RAID_SEL1)

This jumper allows you to select the RAID configuration utility to use when

you create disk arrays. Place the jumper caps over pins 1–2 if you want to

use the LSI Logic Embedded SATA RAID Setup Utility (default); otherwise,

place the jumper caps to pins 2–3 to use the Intel

Rapid Storage Technology.