Asus W90V - Manual (Page 67)

Appendix
A
A-
System BIOS Settings
Boot Device
2� Select each item and press
[ Enter] to select a device�
1� On the Boot screen, select
Boot Device Priority.
Security Setting
To set the password:
1� On the
Security screen, select
Change Supervisor or Change
User Password.
2� Type in a password and press
[ Enter]�
3� Re-type to confirm the
password and press [ Enter]�
4� Password is then set�
To clear the password:
1� Leave the password field blank
and press [ Enter]�
2� Password is then cleared�
Select Screen
Select Item
Enter Go to Sub Screen
F1 General Help
F10 Save and Exit
ESC Exit
v02.58 (C)Copyright 1985-2008, American Megatrends, Inc.
BIOS SETUP UTILITY
Main Advanced Power Boot Tools Exit
Boot Settings
Boot Device Priority
Hard Disk Drive
Boot Settings Configuration
Security
Specifies the Boot
Device Boot Priority
sequence.
A virtual floppy disk
drive (Floppy Drive B:
) may appear when you
set the CD-ROM drive
as the first boot
device.
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
v02.58 (C)Copyright 1985-2008, American Megatrends, Inc.
BIOS SETUP UTILITY
Boot
Boot Device Priority
1st Boot Device [Removable Dev.]
2nd Boot Device [HDD:PO-WDC WD2500B]
3rd Boot Device [CD-ROM:P2-MATSHITAD]
Specifies the boot
sequence from the
availabe devices.
A device enclosed
in parenthesis has
been disabled in the
corresponding type menu.
Select Screen
Select Item
Enter Change
F1 General Help
F10 Save and Exit
ESC Exit
v02.58 (C)Copyright 1985-2008, American Megatrends, Inc.
BIOS SETUP UTILITY
Boot
Security Settings
Supervisor Password : Not Installed
User Password : Not Installed
Change Supervisor Password
Change User Password
to change
password.
again to
disabled password.