Asus V3-M2NC61S - Manual (Page 57)

4-7 ASUS V-Series M2NC61S
5. CPU fan connector (3-pin CPU_FAN)
The fan connector supports cooling fan of a total of 1A~2.2A (26.4W
max.) at +12V. Connect the fan cable to the fan connector on the
motherboard, making sure that the black wire of each cable matches
the ground pin of the connector.
R
CPU FAN Connector
CPU_FAN
GND +12V
Tachometer
6. IEEE 1394a port connector (10-1 pin IE1394_2)
This connector is for a IEEE 1394a port. Connect the IEEE 1394a
module cable to this connector, then install the module to a slot
opening at the back of the system chassis.
Never connect a USB cable to the IEEE1394a connector. Doing so will
damage the motherboard!
R
IE1394_2
GND +12V TPB1- GND TP
A1-
+12V
TPB1+
GND
TP
A1+
1
IEEE 1394a Connector
The IEEE 1394 module is purchased separately.