Asus WL-AM602 - Manual (Page 8)

WL-AM602 Combo Router User Manual
6
LAN USB ACT STATUS POWER
Hardware connections
ADSL connection
Use the ADSL splitter supplied in the package to split the ADSL signal and telephone
service. Connect your ASUS WL-AM602 Combo Router to the DSL port of the splitter
with the telephone cable supplied in the package. Use another telephone cable to
connect your telephone to the Phone port of the ADSL splitter.
Ethernet connection
You can use either the Ethernet cable or the USB cable supplied in the package for
Ethernet connection. The WL-AM602 Combo Router has an integrated auto-crossover
function. You can use either a straight-through or a crossover cable for Ethernet
connection.
To establish a connection using an Ethernet cable, plug one end of the Ethernet cable to
the LAN port on the router rear panel and the other end to the Ethernet port on your PC.
To establish a connection using a USB cable, plug one end of the USB cable to the
USB port on the router rear panel and the other end to a free USB port on your PC. The
Found New Hardware window appears. Refer to USB driver installation for details.
If your LAN has more than one PC, you can connect one end of an Ethernet cable to a
hub or switch and the other end to the LAN port on the router rear panel.
Power connection
To power on the router:
1. Connect the AC power cord to the AC adapter.
2. Connect the DC output plug on the AC adapter to the POWER port on the
rear panel of your router.
3. Plug the AC power cord into a power outlet.