Asus Xonar DGX - Manual (Page 30)

24 ASUS Xonar DGX
6.2.2 Analog Out mode
No Item Description
1 Analog Out The Analog Out setting is used to match your actual
speaker setting, such as headphones, 2 speakers (or 2.1),
4 speakers (or 4.1), 5.1 speakers, Front Panel Headphone
and Front Panel 2 speakers (or 2.1). Xonar DGX will play the
channels and do the proper 3D surround sound processing
accordingly. Select the correct speaker type for your
connected speakers.
2 Speaker Test Click this button to show the speaker test window in the right
pane. Click the “play” button to test each speaker one by one
or click each speaker manually to test.
3 �P Advanced Setting Clicking this button allows you to select the gain tuning
according to your usage scenario or matching headphone
impedance. The setting is also available for FP Headphone.
Usage scenario or �eadphone impedance DAC setting
Exciter Mode or for >64ohms headsets 16 dB boost
Pro-gaming Mode or for 32~64ohms headsets 9 dB boost
VOIP Mode or for <32ohms headsets 0 dB boost
4 Dolby �eadphone
enable/disable
Tick this checkbox to enable Dolby Headphone. Click the
textbar to switch the right window to Dolby Headphone page
for manual adjusting.
� 7.1 Virtual Speaker Shifter can be selected only when
Dolby Headphone is enabled.
1
2
3
�eadphone
4