Asus ET2011AGT - Manual (Page 29)

English
29 All-in-one PC ET2011 Series
7. Firmly install your wall mount kit (VESA75 or VESA100) to the All-in-one PC using four
screws (M4 x 16mm) that came with the wall mount kit package.
• The wall mount kit in this illustration is for reference only.
• The wall mount kit and screws are purchased separately.
8. Carefullly fasten the wall mount kit to the wall following the instructions described in the
installation manual that came with your wall mount kit package.
HDMI
ANT/CABLE
100 mm
75 mm
For ventilation’s sake, ensure that you leave a distance of 6cm at least between the system and
the wall.