Asus Z9PH-D16 - Manual (Page 142)

5-36 Chapter 5: RAID configuration
5.4.1 Creating a RAID set
To create a RAID set
1. From the utility main menu, select Create Volume and select volume type.
2. Then click Next.
3. Enter a name for the RAID set, then select the array disks.
4. Select Volume Size tab, you can drag the bar to decide the volume size.
5. Then click Next.
• If you hard disk with existing data and you don’t want to keep data from one
of the selected disks, choose NO in next column (If displayed).
• If you want to Enable volume write-back cache or Initialize volume, you
can click Advanced tab to slelect.