Asus VK228T - Manual (Page 17)

2-3 ASUS VK228 LCD Monitor
2.4 Connecting the cables
Connect the cables as the following instructions:
HDMI DVI VGA
VGA
DVI HDMI
USB 2.0 Earphone jack
Audio-in
To connect the audio cable: • connect one end of the audio cable to the
monitor’s Audio-in port, the other end to the computer’s audio-out port.
To connect the power cord • : connect one end of the power cord securely to
the monitor’s AC input, the other end to a power outlet.
To connect the VGA/DVI/HDMI cable • :
Plug one end of the VGA/DVI/HDMI cable to the monitor’s VGA/DVI/ a.
HDMI port.
Connect the other end of the VGA/DVI/HDMI cable to your computer's
b.
VGA/DVI/HDMI port.
Tighten the two screws to secure the VGA/DVI connector.
c.
To use the webcam: • connect the upstream port of the monitor and the USB
port of your computer with the supplied USB cable.
To use the earphone (only when an HDMI cable is connected)
• : connect the
end with plug type to the monitor’s earphone jack.
When these cables are connected, you can choose the desired signal from the
Input Select item in the OSD menu.
2.5 Turning on the monitor
Press the power button . See page 1-2 for the location of the power button. The
power indicator lights up in blue to show that the monitor is ON.