Asus ET1610PT - Manual (Page 22)

English
22 EeeTop PC ET16 Series
2. Take out the four rubber items in the panel
holes, and then remove the four screws
from the panel. Keep the screws for later
use.
4. Install your wall mount kit (VESA75) to the
wall mount pad using four screws (M4 x 10L)
that came with the wall mount kit package.
The wall mount kit in this illustration is for
reference only.
3. Secure the wall mount pad to the rear
panel with the four screws (M3 x 8L) you
removed in the previous step noting the
correct orientation.
5. Fasten the wall mount kit to the wall
following the instructions described in the
installation manual that came with your
wall mount kit package.
For ventilation’s sake, ensure that you leave a distance of 6cm at least between the system and
the wall.