Asus WL-500W - Manual (Page 6)

WL-500W Wireless Router Quick Start Guide
Static IP user
If you are using ADSL or other connection type that uses
static IP address, select ADSL or other connection type
that uses static IP address. Input the IP address, subnet
mask, and default gateway provided by your ISP. You can
specify DNS servers, or get DNS information automatically.
PPPoE user
If you use PPPoE service, select ADSL connection
that requires username and password. It is known as
PPPoE. You need to input the username and password
provided by your ISP. Click Next to continue.
PPTP user
If you are using PPTP services, select ADSL connection
that requires username, password and IP address. Fill in
the username, password and IP address provided by your
ISP into the fields. Click Next to continue.
herk036@adsl-comfort
3. To set up your wireless interface, specify an SSID
(Service Set Identifier), which is a unique identifier
attached to packets sent over WLAN. This identifier
emulates a password when a device attempts to
communicate with your wireless router via WLAN.