Asus WL-500W - Manual (Page 2)

WL-500W Wireless Router Quick Start Guide
2
PWR (Power)
Off No power
On System ready
Flashing-slow Firmware upgrade failed
Flashing-quick EZsetup processing
AIR (Wireless Network)
Off No power
On Wireless system ready
Flashing Transmitting or receiving data
(wireless)
WAN (Wide Area Network)
Off No power or no physical
connection
On Has physical connection to an
Ethernet network
Flashing Transmitting or receiving data
(through Ethernet cable)
LAN -4 (Local Area Network)
Off No power or no physical
connection
On Has physical connection to an
Ethernet network
Flashing Transmitting or receiving data
(through Ethernet cable)
3) Wall mount option
Out of the box, ASUS WL-
500W Wireless Router is
designed to sit on a raised
flat surface like a file cabinet
or book shelf. The unit
may also be converted for
mounting to a wall or ceiling.
Follow these steps to mount the ASUS Wireless Router
to a wall:
1. Look on the underside for the two mounting hooks.
2. Mark two upper holes in a flat surface.
3. Tighten two screws until only 1/4'' is showing.
4. Latch the hooks of the ASUS Wireless Router onto
the screws.
Note: Re-adjust the screws if you cannot latch
the ASUS Wireless Router onto the screws or if it
is too loose.