2 detaching the arm/stand (for vesa wall mount) – Asus VW161S User Manual
Page 12
2-2
Chapter 2: Setup
2.2
Detaching the arm/stand
(for VESA wall mount)
The detachable stand of the VW1
61 Series LCD monitor is specially designed for
VESA wall mount.
To detach the arm/stand:
1.
Remove the arm cover.
2.
Have the front of the monitor face down on a table.
3.
Use a screwdriver to remove the three screws on the stand of the monitor as
the below drawing shows.
4.
Detach the arm from the monitor.
•
We recommend that you cover the table surface with soft cloth to prevent
damage to the monitor.
•
Hold the stand of the monitor when you remove the screws.
The VESA wall mount kit (
75 mm x 75 mm) is purchased separately.
screws