Asus CP240 - Manual (Page 13)

2-1 ASUS LCD Monitor CP220/CP240 Series
2.1 Detaching the arm/stand (for wall mounting)
To detach the arm/stand.
1. Disconnect power and signal cables. Carefully put the front of the
monitor face down on a clean table.
2. Use your fingers gently pull away the plate that covers the stand
neck. Use a screwdriver to remove the four screws that secure the
stand to the monitor.
3. Detach the stand from the monitor.
• We recommend that you cover the table surface with soft cloth to prevent from
damaging the display.
• Hold the stand while removing the screws.
3
2 1
• The (100 x 100 mm) wall mount kit is not included in the product purchased.
• Use only the UL listed wall mount bracket with minimum weight/load 14kg
(Screw size: M4 x 10 mm).