Asus VN279QLB - Manual (Page 18)

2-4 Chapter 2: Setup
2.4 Using the connector cover
•. To.remove.the.connector.cover:
a. Pull the connector cover downwards.
b. Lift the connector cover form its center.
1
1
2
•. To.assemble.the.connector.cover:
a. Insert the 2 tabs on both sides of the cover into the monitor.
b. Push the connector cover up to its original position.
2.5 Connecting the cables
1. Connect the cables as the following instructions:
VN279QL
VN279QLB
USB DP
USB
VGA
HDMI
Earphone jack
Audio-in
•. To.connect.the.power.cord: connect one end of the power cord securely to
the monitor’s AC input port, the other end to a power outlet.
•. To.connect.the.VGA/HDMI.(MHL)/DisplayPort.cable:
a. Plug one end of the VGA/HDMI (MHL)/DisplayPort cable to the
monitor’s VGA/HDMI (MHL)/DisplayPort jack.
b. Connect the other end of the VGA/HDMI (MHL)/DisplayPort cable to
your computer or mobile device's VGA/HDMI (MHL)/DisplayPort jack.