5 ide configuration, Pio mode [auto, Dma mode [auto – Asus V3-P5G965 User Manual
Page 80: Smart monitoring [auto, 32bit data transfer [disabled, Sata configuration [enhanced, Hard disk write protect [disabled, Ide detect time out [35
5-16
Chapter 5: BIOS setup
PIO Mode [Auto]
Selects the PIO mode.
Configuration options: [Auto] [0] [1] [2] [3] [4]
DMA Mode [Auto]
Selects the DMA mode. Configuration options: [Auto] [SWDMA0]
[SWDMA1] [SWDMA2] [MWDMA0] [MWDMA1] [MWDMA2] [UDMA0]
[UDMA1] [UDMA2] [UDMA3] [UDMA4] [UDMA5]
SMART Monitoring [Auto]
Sets the Smart Monitoring, Analysis, and Reporting Technology.
Configuration options: [Auto] [Disabled] [Enabled]
32Bit Data Transfer [Disabled]
Enables or disables 32-bit data transfer.
Configuration options: [Disabled] [Enabled]
5.3.5 IDE Configuration
The items in this menu allow you to set or change the configurations for
the IDE devices installed in the system. Select an item then press
if you wish to configure the item.
IDE Configuration
SATA Configuration
[Enhanced]
Hard Disk Write Protect
[Disabled]
IDE Detect Time Out (Sec)
[35]
SATA Configuration [Enhanced]
Configuration options: [Compatible] [Enhanced] [Disabled]
Hard Disk Write Protect [Disabled]
Allows you to enable to disable the hard disk write protection. This will be effective only
if device is accessed through BIOS. Configuration options: [Disabled] [Enabled]
IDE Detect Time Out [35]
Selects the time out value for detecting ATA/ATAPI devices.
Configuration options: [0] [5] [10] [15] [20] [25] [30] [35]