Asus PIKE 9230 - Manual (Page 30)

3-10 Chapter 3: RAID configuration
6. Press . The following warning message appears:
Press to save the RAID setting and exit the Marvell Storage Utility.
Do you want to exit from Marvell BIOS Setup?
Y es N o
Exit
3.3.2 Delete an existing RAID Array
1. Select the RAID array to delete and press . Select Delete and press
.
Marvell BIOS Setup (c) 2011 Marvell Technology Group Ltd.
Help
Delete the selected virtual disk.
ENTER: Operation F10: Exit/Save ESC: Return
HBA 0: Marvell 0
├ Virtual Disks
│ └ VD 0: New_VD
│ ├ PD 0: ST3160812AS
│ └ PD 8: ST3160812AS
└ Free Physical Disks
ID : 0
Name : New_VD
Status : Functional
Stripte Size : 64K
RAID Mode : RAID0
Size : 304128MB
BGA Status : N/A
Number of PDs : 2
Members : 0 8
▶ ▶
Topology Information
[Delete]
Marvell BIOS Setup (c) 2011 Marvell Technology Group Ltd.
Help
Marvell RAID on chip controller.
ENTER: Operation F10: Exit/Save ESC: Return
HBA 0: Marvell 0
├ Virtual Disks
│ └ VD 0: New_VD
│ ├ PD 0: ST3160812AS
│ └ PD 8: ST3160812AS
└ Free Physical Disks
Vendor ID : 1B4B
Device ID : 9130
Revision ID : B1
BIOS Version : 1.0.0.1028
Firmware Version: 2.2.0.1105
PCIe Speed Rate : 5.0Gbps
Configure SATA as: AHCI Mode
▶ ▶
Topology Information