Asus P4T533-C - Manual (Page 52)

48 Chapter 4: BIOS Setup
5. At the prompt, “Please Enter File Name for NEW BIOS: _” , type in the
BIOS file name that you downloaded from the ASUS website, then
press .
EZ Flash will automatically access drive A to look for the file name that
you typed. When found, the following message appears on screen.
If you accidentally typed in a wrong BIOS file name, the error
message,
“WARNING! File not found.” appears. Press to
remove the message, then type in the correct file name. Press
.
6. At the above prompt, type Y to continue with the update process.
Pressing N exits the EZ Flash utility and reboots the system without
updating the BIOS.
The following prompts appear if you pressed Y.
[BIOS Information in File]
BIOS Version: P4T533-C Boot Block
WARNING! Continue to update the BIOS (Y/N)? _
7. For item 1, “Update Main BIOS area,” press Y to update.
8. For item 2, “Update Boot Block area,” press Y to update.
DO NOT shutdown or reset the system while updating the BIOS boot
block area! Doing so may cause system boot failure.
9. When the update process is done, the message, “Press a key to
reboot” appears. Press any key to reboot the system with the new
BIOS.
Flash Memory: SST 49LF004
1. Update Main BIOS area (Y/N)? _
2. Update Boot Block area (Y/N)? _