1 detaching the arm/stand (for vesa wall mount) – Asus VE278N-W User Manual
Page 14

2-1
Chapter 2: Setup
2.1
Detaching the arm/stand
(for VESA wall mount)
The detachable stand of the VE278 Series LCD monitor is specially designed for
VESA wall mount.
To detach the arm/stand:
1.
Disconnect power and signal cables. Carefully put the front of the monitor
face down on a clean table.
2.
Use a screwdriver to remove the two screws that secure the stand to the
monitor.
3.
Detach the stand from the monitor.
•
We recommend that you cover the table surface with soft cloth to prevent
damage to the monitor.
•
Hold the stand of the monitor while removing the screws.
•
The VESA wall mount kit ( 100 x 100 mm) is purchased separately.
•
Use only the UL Listed Wall Mount Bracket with minimum weight/load
24.4kg (Screw size: 4 x 10 mm).