Troubleshooting and faqs, Troubleshooting – Asus Xonar DG User Manual
Page 55
49
ASUS Xonar DG
7.
Troubleshooting and FAQs
[Troubleshooting]
The audio card driver could not be installed on my PC.
Instructions�
1. Make sure that you have properly plugged the audio card in the PCI slot on
your motherboard.
2. Check that the Windows hardware device manager has discovered a
multimedia audio device. If no device is found, please try scanning for new
hardware.
3. Try soft reboot (restart) your Windows.
4. Remove the card, plug it into another PCI slot, and try again.
I cannot find the Xonar DG Audio Center
Instructions�
1. Make sure you have installed the driver
2. Locate the Xonar DG Audio Center icon in the system tray on the bottom
right-hand corner of the screen. Double-click the icon to open the Xonar DG
Audio Center utility.
3. If the icon could not be found in the system tray, go to the Windows Control
Panel and double click the “Xonar DG Audio Center” icon to make it visible in
the system tray again.
4. After the driver installation is complete, it’s recommended that you reboot
your computer to complete the setup. If the icon still doesn’t appear, please
try installing the driver package again.
I cannot hear any sound from my analog speakers
Instructions�
1. Ensure that you have connected speakers properly and have powered on
your speakers.
2. Ensure that the device master volume or the software player has NOT been
muted on the Xonar DG Audio Center.
3. Go to the sound and audio device of Windows Control Panel to check if the
playback default device is set to Xonar DG Audio Device, instead of other
onboard AC97 or HDA codec device. If it’s not, please set it to Xonar DG
Audio Device and restart your applications.
4. Try restarting your Windows.