Asus P2B-S - Manual (Page 63)

ASUS P2B-L/P2B-S/P2B-LS User’s Manual 63
VII. NETWORK
Features
VII. NETWORK INTERFACE
This motherboard features an optional 32-bit 10/100Mbps Ethernet network inter-
face. This interface supports the bus mastering architecture and auto-negotiation
feature, which makes it possible to use the common twisted-pair cabling with RJ45
connectors for both 10Mbps and 100Mbps connections. Extensive driver support
for commonly-used network systems is also provided.
Features
• Intel 82558 Ethernet LAN Controller (Fully integrated 10BASE-T/100BASE-TX)
• Wake-On-LAN Remote Control Function Supported
• PCI Bus Master Complies to PCI Rev. 2.1
• Consists of MAC & PHY (10/100Mbps) interfaces
• Complies to IEEE 802.3 10BASE-T and IEEE 802.3U 100BASE-TX interfaces
• Fully supports 10BASE-T & 100BASE-TX operations
• Single RJ-45 Connector: Auto-Detection of 10Mbps or 100Mbps Network Data
Transfer Rates and Connected Cable Types
• 32 bit Bus Master Technology / PCI Rev. 2.1
• Plug and Play
• Enhancements on ACPI & APM
• Adheres to PCI Bus Power Management Interface Rev. 1.0, ACPI Rev. 1.0, and
Device Class Power Management Rev. 1.0
Software Driver Support
NetWare ODI Drivers - Novell Netware 3.x, 4.x; NetWare LAN WorkPlace TCP/IP;
Novell LAN Analyzer for Netware
Packet Drivers - FTP PC/TCP, NCSA TCP/IP, Accton LANSoft
NDIS Drivers - LAN Manager V2.x; Windows 3.x, 95, NT (Server/Workstation) V3.x,
V4.0; IBM LAN Server 2.x, 3.0; IBM LAN Support V1.x; IBM OS/2 EE V2.0; DEC
Pathworks V4.x & V5.0; Sun PC-NFS; Banyan VINES; IBM TCP/IP for DOS & OS/
2; Wollongong Pathway Access
Unix Driver - SCO Unix