Asus A8S-X - Manual (Page 68)

2-28 Chapter 2: BIOS Setup
After you have set a supervisor password, the other items appear to allow
you to change other security settings.
If you forget your BIOS password, you can clear it by erasing the CMOS
Real Time Clock (RTC) RAM. See section “1.9 Jumpers” for information
on how to erase the RTC RAM.
2.6.3 Security
The Security menu items allow you to change the system security settings.
Select an item then press to display the configuration options.
Change Supervisor Password
Select this item to set or change the supervisor password. The Supervisor
Password item on top of the screen shows the default Not Installed. After
you have set a password, this item shows Installed.
To set a Supervisor Password:
1. Select the Change Supervisor Password item and press .
2. From the password box, type a password combination of at least six
(6) letters and/or numbers, then press .
3. Confirm the password when prompted. The message “Password
Installed” appears after you have successfully set your password.
The Supervisor Password item now shows Installed.
To change the supervisor password, follow the same steps as in setting a
user password.
To clear the supervisor password, select the Change Supervisor Password
then press . The message “Password Uninstalled” appears.
Interrupt 19 Capture [Disabled]
When set to [Enabled], this function allows the option ROMs to trap
Interrupt 19. Configuration options: [Disabled] [Enabled]
Security Settings
Supervisor Password : Not Installed
User Password : Not Installed
Change Supervisor Password
to change
password.
again to
disable password.