Asus A8S-X - Manual (Page 55)

ASUS A8S-X SE 2-15
PCI Express Frequency [Auto]
Allows you to set the PCI Express frequency.
Configuration options: [Auto] [90] [91] ~ [104]
PCI Clock Synchronization Mode [To PCI Express]
Sets the PCI Express clock synchronization mode.
Configuration options: [To PCI Express] [33.33MHz] [37.5MHz] [40.0MHz]
DDR Reference Voltage [Auto]
Allows you to automatically detect or select from a list the DDR operating
voltage. Configuration options: [2.6V] [2.7V] [2.8V] [2.9V] [Auto]
FID/VID Change [Auto]
Sets the frequency ID and voltage ID.
Configuration options: [Auto] [Manual]
Processor Frequency Multiplier [x10 2000 MHz]
Sets the processor frequency multiplier. The default value varies depending
on the processor installed. This item appears only when the FID/VID Change
item is set to Manual. Configuration options: [x8 1600 MHz] [x9 1800
MHz] [x10 2000 MHz]
Processor Voltage [1.400 V]
Sets the processor voltage. The configuration options vary depending on
the processor installed. This item appears only when the FID/VID Change
item is set to Manual.
2.4.2 USB Configuration
The items in this menu allows you to change the USB-related features.
Select an item then press to display the configuration options.
OnBoard SiS USB1.1 DEVICE [Enabled]
OnBoard SiS USB2.0 DEVICE [Enabled]
USB Configuration
Module Version - 2.24.0-11.4
USB Devices Enabled: None
Legacy USB Support [Enabled]
USB 2.0 Controller Mode [HiSpeed]
BIOS EHCI Hand-Off [Enabled]
OnBoard SiS USB1.1 DEVICE [Enabled]
Allows you to enable or disable the onboard SiS USB 1.1 port.
Configuration options: [Disabled] [Enabled]