Asus DSBV-D - Manual (Page 48)

- Chapter 2: Hardware information
8. Force BIOS recovery setting (3-pin RECOVERY1)
This jumper allows you to quickly update or recover the BIOS settings when it
becomes corrupted.
To update the BIOS:
1. Prepare a floppy disk that contains the latest BIOS for the motherboard
and the Phoenix Phlash16 utility. Make sure you download the correct
BIOS for your motherboard model.
2. Set the jumper to pins 2-3.
3. Insert the floppy disk then turn on the system to update the BIOS.
4. Shut down the system.
5. Set the jumper back to pins 1-2.
6. Turn on the system.
DSBV
-D
DSBV-D BIOS recovery setting
RECOVERY1
(Default)
Normal BIOS Recovery
1 2 2 3
DSBV
-D
DSBV-D DIP switches
DIP_SW1 ON:4-PIN FAN
OFF:3-PIN FAN
SW1:CPU_FAN1
SW2:CPU_FAN2
SW3:FRNT_FAN1
SW4:FRNT_FAN2
SW5:FRNT_FAN3
SW6:FRNT_FAN4
SW7:REAR_FAN1
SW8:REAR_FAN2
ON OFF
ON
1
2
3
4
5
6
7
8 (Default)
9. DIP switches (DIP_SW1)
This switch allows you to set up the fan connections. Set the switch to ON if
you are using a 4-pin fan (PWM fan) cable plug, or to OFF if you are using a
3-pin (PC fan) plug.