Asus DSBV-D - Manual (Page 23)

ASUS DSBV-D -
2.2.3 Support kits for the motherboard
For additional protection from motherboard breakage due to the weight of the CPU
heatsinks, your motherboard package comes with CEK springs that you can use as
weight support. Install the CEK springs before installing the motherboard.
To install the CEK spring:
1. Locate the CPU heatsink holes on
the motherboard.
2. Position the CEK spring underneath
the motherboard, then match the
CEK spring hooks to the CPU1
heatsink holes.
Heatsink hole
Socket for CPU2
Socket for CPU1
Hook
Each CEK spring has four hooks to match the
designated holes around the CPU area.
If your chassis is SSI EEB 3.61 compliant, we recommend that you use the CEK
springs; otherwise, use the support plates kit.