beautypg.com

Installation, Positioning – Hotpoint Ariston KIO 633 T X User Manual

Page 24

background image

24

GB

Installation

Before operating your new appliance please read this instruction

booklet carefully. It contains important information concerning the

safe operation, installation and maintenance of the appliance.

Please keep these operating instructions for future reference.

Pass them on to any new owners of the appliance.

Positioning

Keep all packaging material out of the reach of children. It may

present a choking or suffocation hazard (see Precautions and

tips).

The appliance must be installed by a qualified professional in

accordance with the instructions provided. Incorrect installation

may cause harm to people and animals or may damage property.

Built-in appliance

Use a suitable cabinet to ensure that the appliance functions

properly.

• The supporting surface must be heat-resistant up to a

temperature of approximately 100°C.

• If the appliance is to be installed above an oven, the oven

must be equipped with a forced ventilation cooling system.

• Avoid installing the hob above a dishwasher: if this cannot be

avoided, place a waterproof separation device between the

two appliances.

• Depending on the hob you want to install, the cabinet must

have the following dimensions (see figure):

560 +

/- 1

490 +/- 1

48

590

520

Ventilation

To allow adequate ventilation and to avoid overheating of the surrounding

surfaces the hob should be positioned as follows:

• At a minimum distance of 40 mm from the back panel.

• So that a minimum distance of 20 mm is maintained between

the installation cavity and the cabinet underneath.

• Kitchen cabinets adjacent to the appliance and taller than the

top of the hob must be at least 600 mm from the edge of the

hob.

Fixing

The appliance must be installed

on a perfectly level supporting

surface.

Any deformities caused by improper fixing could affect the

features and operation of the hob.
The thickness of the supporting surface

should be taken into

account when choosing

the length of the screws for the fixing

hooks:

FRONT SIDE

OF HOB

SUPPORTING

SURFACE

30

40

UNDERSIDE

OF HOB

5 mm

min. 20 mm

min. 20 mm

min. 40 mm

COMPARTMENT

5 mm

min. 40 mm

FAN-ASSISTED

OVEN